Avast Says My Router Is Not Configured Correctly


Simple Guide to Fix Avast Says My Router Is Not Configured Correctly

One of the most successful and well-known names in the world of computer security is Avast. Because of how things have transpired, they want to ensure the safety of every aspect of your time spent using a computer.

One potential vulnerability is the home router; since you now have access to the Avast WiFi inspector, you should review what it says; the tool might indicate a problem.

When Avast warns me that my Router is not set up properly, it has most likely identified other aspects of my network that it considers suboptimal and recommends that I modify them.

You can find out why Avast thinks my Router is vulnerable and what you can do to fix it in this website section.

Why does Avast Claim That My Router Is Not Setup Correctly?

There are a few different explanations for why Avast is displaying this message to you. Your network will be more secure due to all these measures.

The resolution of this issue will require some effort, but doing so will ensure that your home network is secure and that hackers will not be able to take advantage of it.

The insufficient WiFi security range

This warning will appear in Avast if the security of your WiFi network is inadequate. It can determine whether or not the password for your WiFi network is secure.

It is also aware of whether or not any form of encryption was set by you. Your network will be more susceptible to attacks if you do not do this. Because of this, it is strongly suggested that you correctly configure your Router.

Drivers for the network that are too old

Your WiFi network is vulnerable because you do not have a password or because your password is weak.

Hackers can take advantage of the fact that your network drivers have not been updated in a while if you have not done so.

They can access your network using a WiFi card missing the most recent drivers.

Software for Routers (Firmware)

The device that connects your entire local area network (LAN) to the outside world is called a router.

If the firmware on it is not kept up to date, it becomes an entry point for cybercriminals and anyone else who wants to access the sensitive data on your device.

How do I set up the security on my WiFi network?

Many people are under the impression that the security of their home network is much higher than it is.

If you don’t change any of the settings, the defaults are very insecure, and hackers can quickly hop onto your network to use it or access any devices to try to glean information from them. The defaults are very insecure if you don’t change any of the settings.

You may have problems with hackers, but you may also have problems with neighbors or even the government, which may gain access to your network through mass surveillance.

You can choose from the following three methods of encryption:

  1. WEP, or Wired Equivalent Privacy, was a popular protocol in the 1990s.
  2. WPA stands for “WiFi Protected Access,” designed to take the place of WEP.
  3. WPA2 is the most current security standard to be implemented.

To log in from the user’s device to the access point or Router, WPA2-Personal generates a 256-bit key from the simple text phrase you provide. This key is sometimes referred to as a PSK (PreShared Key).

Please note that the passphrases can only determine the strength of the security. The part of the WPA2-Personal encryption that is the most vulnerable is the part where users don’t change their passphrases or post ones that aren’t very strong.

How Do I Fix the Settings on My Router?

Resetting your Router is one of the most effective ways to fix any issues with its settings. You will need to re-configure the Router, so make sure you have the previous password and login information handy. This means that you will need to access the Router directly.

  1. There ought to be a reset hole; all you need to use is a paperclip with its opening exposed.
  2. Put it through the opening, and then keep it there for thirty seconds.
  3. It is recommended that the wireless Router be reset to its factory settings.
  4. If you do this, the Avast message that says “this network is not secure” will appear on your screen because your device is not configured.

It is possible to ensure that there are no unauthorized devices connected to your network by performing this action in conjunction with changing the password and the SSID. Although your Router broadcasts your SSID, you have the option to disable this feature if you so choose.

What Could Be Causing My Computer to Be Unable to Connect to My Router?

There will likely be times when you cannot establish a connection to the Router. Restarting the Router is typically the most effective way to resolve this issue, as doing so will partially reset any settings that may have been corrupted due to the problem.

If restarting the device does not fix the problem, you can try checking to see if any of these are to blame.

  1. Ensure that you are utilizing the most recent version of network drivers by performing an update on those drivers. It is recommended that you obtain these from the motherboard manufacturer’s website.
  2. Verify that you can see the Router: If your device has the incorrect address, it will not be able to see it. You can find the command prompt by pressing the Windows key with the letter X. Enter ipconfig/ all. Make sure that the default gateway supports connections from your browser by checking it out ( in many cases).
  3. Try using a different web browser or device: If only one device or browser cannot connect, this indicates that the problem lies with the device itself and not with the Router.
  4. You can try running the network troubleshooter that comes with Windows 10 to see if this can fix anything by performing a network scan.
  5. Navigate to the settings menu and select the Updates and Security – Troubleshooter option. If you can complete the steps as instructed and then restart your computer after you’re done, your issue should be resolved.

It’s all clear. If conducting a network scan or an Avast security scan does not resolve the issue, you can use the command prompt to clear some of the following settings:

  • netsh Winsock reset
  • netsh int IP reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns

How to Fix Avast Says My Router is Not Configured Correctly?

Since you now understand what triggers the Avast message that “my router is not configured correctly,” you will be able to take the appropriate actions to fix the problem.

Fix #1: You should make sure that your computer’s drivers for its WiFi card are up to date

A network card is present in any electronic device that communicates with your wireless Router. It is an essential piece of hardware, and you need it to have the most recent software on your computer. This will ensure that your computer operates as efficiently as it possibly can.

If they are out of date, they may cause problems and provide hackers with an opportunity to break into the system.

If you are working off a laptop, you can be certain that it already has a WiFi card installed that requires an update. The same is true for Apple’s MacBook.

  1. Navigate to your computer’s Device Manager.
  2. Choose one of the available WiFi cards from the list.
  3. Simply right-clicking on it will reveal further customization options.
  4. Click Update driver.

The process of updating will begin once you click this button. In the background, it will search for the most recent online drivers, download them, and install them. The only thing left for you to do is wait until the process is complete.

Nevertheless, if you want to be certain, you can always carry out this procedure.

Fix #2: Conduct a Search of the Network

There is more than one step to ensure that your network is safe and that you are correctly configuring your Router.

Since you are already engaged in the activity, you might as well go and perform a scan of the network.

This is a quick step that looks at all of the other devices in your network for you to identify who they are.

If you find one that isn’t supposed to be there, you will need to disconnect it so that it does not use your internet connection or, worse, try to get sensitive personal data from you. If you find one that isn’t supposed to be there, you need to disconnect it.

  1. Activate the window for the Command Prompt.
  2. In the search bar, type ipconfig, and note the IP address that appears.
  3. To find out what other devices are connected to your network, you can find out by entering the arp -a command.
  4. Examine the devices connected to your network to see if any of them appear suspicious.

If more devices are connected to your network than you can count, you can determine each device’s IP address by running the ipconfig command on it.

By logging in to your Router’s dashboard, you will be able to remove the potentially malicious device from your network.

Fix #3: Flush the Domain Name System Settings

Flushing your DNS cache regularly is one of the simplest ways to improve the security of both your network and your Router.

Your network’s cache may, on occasion, store potentially harmful IP addresses; these addresses have the potential to disrupt connectivity and compromise network security.

By flushing your DNS settings, any IP addresses and other DNS records will be removed. This should make it possible to resolve various problems, including the notification that your Avast router is not configured correctly.

Regularly performing this action helps to prevent DNS spoofing and keeps your online behavior private, which can significantly improve the security of your network.

The following is a list of the steps that you need to take to reset your DNS settings:

  1. To access the Windows Settings menu, simultaneously press the Win and X keys on your keyboard.
  2. Select the Command Prompt (Admin) option to gain access as an administrator.
  3. In the window labeled “Command Prompt,” type “ipconfig /flushdns.”
  4. Wait until the message says the DNS Resolver Cache has been flushed successfully.

It is expected that this will work in conjunction with the flush DNS command to ensure that your IP address is updated.

Encrypting your WiFi password is required if you are connected to a wireless network. Most network configurations will typically leave this unencrypted, meaning your WiFi connection will not be secure.

This will create a vulnerability that will allow intruders and attackers to access more information about you and your organization.

If you leave your WiFi network unprotected, the My Router is Not Configured Correctly notification will appear on your Avast software. Even if it doesn’t interfere with your typical internet activities, being aware of this can make you anxious.

Enabling WPA2 or WPA3 encryption on your WiFi network will do the trick and solve this problem, allowing you to stop being bothered by it after you do it.

The following is a guide that will show you how to activate encryption on your Router:

  1. Use a web browser to access the configuration settings for your Router.
  2. Enter the username and password for your router provided to you by your Internet service provider (ISP).
  3. After entering the dashboard of your Router, navigate to the Security tab.
  4. Enable encryption using either WPA2 or WPA3.
  5. Make sure your WiFi password is secure (at least 10 characters).

Note: When creating a password for this account, make sure it is not the same one you use to log in to any of your other online accounts.

Fix #4: Restore the Default Settings on Your Router

If you have altered any settings on your Router, which resulted in the Router not being configured correctly, a notification appearing, reverting those settings to their previous states should solve the problem.

On the other hand, there are situations where you set your Router in such a different manner that it becomes difficult to reset it manually.

Performing a hard reset on your Router, which will cause it to revert to its original settings, is the method that will get the job done the quickest.

It’s possible that this solution won’t strike you as the most obvious choice to safeguard your network. However, changing a sufficient number of settings makes this the most prudent step to take.

It’s possible that you messed up some important security settings, in which case restoring it to its original factory settings could fix the problem.

  1. Find the physical button on your Router that allows you to reset it.
  2. You’ll most likely find it in the back, right next to the power adapter.
  3. Get a pin or something else that has a pointy end and use that to push the button.
  4. Keep your grip on it for five to ten seconds.
  5. Please be patient while your Router reboots.

Can I Configure My Router Wirelessly?

When you use Avast SecureLine, you will notice that the device is not configured correctly if you have a wireless router set up as part of the home network. Before you even consider contacting tech support about your issue, you should look over the report that the scan generated.

The following steps will guide you through the process of wirelessly configuring your device, which is an easy task to complete.

  1. Put your router’s IP address into the address bar of your preferred web browser.
  2. Sign in using the username and password that were set by default.
  3. In the settings of your Router, select the Setup option.

As can be seen, this is a straightforward process, which is precisely why it is so simple for cybercriminals and other unauthorized users to access your Router. To gain access, it is not necessary to have a wired connection.

It is recommended that you use a Virtual Private Network (VPN) in addition to the one included in the Avast Internet Security package. This is because other people can see the traffic heading to your Router. (Read Start Chrome in Incognito Mode)

You can use the free version of Avast’s security scan to protect yourself from viruses, but only a paid premium VPN will encrypt all your data throughout the entire process. You will discover that you have fewer configuration issues with your Router, and you will be able to quickly prevent cybercriminals, governments, or internet service providers from seeing what you are doing while you are online.

Leave a Reply

Your email address will not be published. Required fields are marked *