Belkin Router Login


You must log in to your Belkin router to modify the WiFi network settings, secure the network, or perform configuration changes. The router’s web interface functions as a control panel where you can view the network’s settings. You can log in and make any changes you desire.

You will require the Belkin router, network connectivity, and a web browser to access the Belkin router login interface. You will need a connecting device such as a computer, phone, or tablet with a web browser to access the login page. A LAN cable or a WiFi connection can be used to connect to the network.

Using the Belkin router login IP, this post will demonstrate how to log into your Belkin router. Changing your WiFi network settings, protecting your network, and other things can be done by logging into your router.

Whatever the cause, we’ll quickly guide you to the login page!

  1. To your network, connect.
  2. Connect to the wireless or wired network that your Belkin router is broadcasting using your smartphone or computer.
  3. Visit the IP address for the Belkin router.
  4. Open your preferred web browser and go to the IP address for the default Belkin login page:
  5. You can reach the login screen by typing or pasting that URL into your browser.
  6. Put in the login information.
  7. No username is necessary to log in.

The Belkin router’s default password is only (blank); therefore, leave the field empty instead of typing anything. Click Submit after seeing the login page without inputting anything.

Password-resetting your router

If this doesn’t work, the default password has likely been altered without your knowledge. Restore the factory defaults on your Belkin router if this is the situation.

This can be accomplished by holding down the reset button on the device’s back with a paper clip or pen for 15 seconds until the router reboots.

See also  How To Locate Default Netgear IP Address?

Changing the default password

Changing the default admin password to a more secure one is a smart idea now that you’re logged in. This option can be found on the control panel, or (on some routers) you may be asked to set one as soon as you log in.

How to Change the SSID and Password for a WiFi Network?

Any wireless network’s SSID (Service Set Identifier) and password are crucial components. These two things are important to understand if you’re trying to join a wireless network. The web-based router interface allows you to obtain this information about your wireless network. You can modify your WiFi network’s SSID (network name) and password if you’d like. Here’s how to modify your WiFi network’s SSID and password:

Modify the SSID:

  1. Using the technique above, log into the Belkin Web-Based Interface.
  2. Go to Wireless > Channel and SSID after logging in.
  3. Enter the new SSID in the SSID field.
  4. To save the changes, press the Apply Changes button now.
  5. The WiFi network’s SSID will be modified after the router reboots.

Alternate Password:

  1. Using the technique above, log into the Belkin Web-Based Interface.
  2. Navigate to Wireless > Security after logging in.
  3. Select WPA/WPA2 by clicking the Allowed Client Type drop-down arrow.
  4. In the Password(PSK) area, type the new password.
  5. To save the changes, press the Apply Changes button now.
  6. The router will restart, and the WiFi network’s password will be modified.

Belkin router factory reset instructions.

Factory resetting the Belkin Router can be helpful when you mix up the router’s settings or change the login password and forget it. In these circumstances, factory resetting the router returns all customized settings to their original state. This implies that the router must be configured initially.

See also  ADSL Modem With Router

Here’s how to restore your Belkin router to factory settings: (Make certain that the router is turned on.)

  1. Find your router’s reset button. Usually, the router’s back has it.
  2. Use a paperclip, needle, or another similar instrument to push and hold the RESET button for 10 to 15 seconds before releasing it.
  3. The router will restart, and all settings will be reset to factory defaults.

Steps for Belkin Login

Here are the procedures for Belkin router login if you want to alter your network settings.

Link to the Internet

To access your router, you must be connected to the network. By entering your username and password, you can access your WiFi. However, you can connect your device with an ethernet wire and access the network without entering the password if you have forgotten your WiFi password.

It would help if you were connected to the network to access your router and carry out all the tasks. With the aid of a VPN, you may even access your Belkin router at home from a distance.

Activate your browser and go to

After establishing a network connection, you can reach the login page by entering your web browser’s Belkin router login IP. Although each router has a unique IP address, the most popular one to access your Belkin router is is another often used IP address to access your router. You must enter this IP address into the browser tab after typing it.

After the address changes, you will be redirected to the Belkin login page at If none of the above IP addresses works for your system, you can check this website for your specific model’s default Belkin IP addresses.

See also  How To Check Router For Malware?

Enter the Belkin Router’s default credentials.

Most of the time, your Belkin router may be accessed without a username. Or it might be Admin or Admin, depending on the model. The password might therefore be empty, Admin, or password. If you haven’t updated your Belkin login information, you can access the router by entering the appropriate password in the appropriate section. Usually, you need to click on submit because the default password is blank. Otherwise, you can seek up the default login information here or on your router’s back label if you’ve forgotten them. You can enter it to access your Belkin router if you’ve already reset your password.

If none of those mentioned above solutions works, it’s possible that the password has been changed without your consent. In this situation, you can easily restore the factory default settings on your router. Hold the reset button on your router for 15 seconds with a paper clip or a pen. The Belkin router will restart independently, and you can log in using the pre-set blank password.

Belkin Router Settings/Configuration

Once you’ve logged in to the Belkin router, you can enter the control panel and make any necessary changes to the settings. Under LAN and wireless setup, firewall, utilities, and media features, the panel offers several options. Before proceeding with any configurations, check the router’s connection condition. To avoid breaking your network connection or creating other issues, you must exercise caution when changing the router’s settings. As a precaution, please note your router’s default configuration or current settings so that, if something goes wrong, you can reset everything back to how it was.

Leave a Reply

Your email address will not be published.