How to Create a Mesh Network With Two Routers?

Author:

In this article we have explained a step by step guide for creating mesh networking using two routers. Before get into the topic lets learn some basics.

What is a mesh Wi-Fi router?

A mesh Wi-Fi router system can be the ideal option if the Wi-Fi router you used in your tiny apartment cannot provide you with the wireless connectivity you need in a larger home.

To construct and share a single, seamless Wi-Fi network that can be expanded to span even the largest homes or buildings, a mesh Wi-Fi router or mesh system connects two or more Wi-Fi access points.

You’ll probably experience Wi-Fi dead zones if you live in a large home (at least 3,000 square feet), one with an odd layout, one that climbs more than two floors, or one with brick walls inside. This suggests that a mesh network instead of a conventional Wi-Fi router would be a viable option for your home.

Modern mesh Wi-Fi systems offer incredibly straightforward setup procedures and enable you to eliminate dead spots by bridging the gaps in your home’s coverage. Once installed, wireless internet connectivity is available throughout your home, including your garage and backyard.

Benefits of mesh routers

1. Simple network management: Mesh-router systems partially differ from conventional routers because of their simple network access. Since many mesh router systems are fully automated, you may operate them conveniently from anywhere using a mobile app. Instead of plugging directly into a router and configuring a device using a browser dashboard, setting up a mesh network with a smartphone app is much simpler.

2. Simplified connections: With conventional routers, range extenders are frequently employed to repeat the signal, allowing Wi-Fi to be accessed from a distance. However, even the greatest Wi-Fi extenders require you to set up a unique network for the range extender with a unique name. This implies that you might need to switch Wi-Fi connections as you travel around the house manually.

3. Strict security: Some residential mesh-router kits offer good security support in addition to simple management. Maintaining your router devices secure is simple because of the previously mentioned simple network management; many automatically search for and apply firmware updates.

Can You Add A Mesh Network to an Existing Router?

Although it is technically possible, adding mesh networks to an existing router might not be the greatest choice. However, mesh networks can still be used if you must keep your current router. In most cases, you’re better off deleting or disabling it.

See also  How To Setup and Access Xfinity Router Login?

Consider conventional routers as having a range of operation; the farther you are from them, the weaker the signal. With Wi-Fi extenders, this signal can be made to reach farther, but it still has a limited range.

Mesh networks function by scattering “nodes” (also known as nodes) around an area, with one node connected to your modem to act as a router. The nodes retain communication with your device and one another as you move throughout your region, keeping the signal at a stronger level. You will have a connection as long as the nodes are correctly positioned.

Double NAT, also known as double Network Address Translation, is a risk when the two are combined. In essence, a conflict arises between your mesh network and traditional router for control of your internet traffic. To stop this from occurring, one of the two needs to be disabled.

What things need to be taken into account when creating mesh WiFi networks?

Mesh WiFi routers come in a variety of brands. Their performance and cost are varied. It would help if you examined the following factors while choosing routers: speed, coverage, ease of setup, and security. V-SOL mesh WiFi routers will be used as an example in this section.

1. Speed

Without a doubt, quicker Internet is always preferable. Increased speed also reduces network congestion and enables more bandwidth-demanding activities like 4K media streaming. It is simple to find a gadget with a speed of 400 Mbps or less on the market. However, you should only consider devices with two bands (2.4GHz and 5GHz) or those marked as tri-band if you need them to achieve 1Gbps or greater.

Dual-band WiFi mesh router V-SOL (WiFi 4 and WiFi 5 wave 2). It uses MIMO 2×2 for both 2.4 GHz and 5.0 GHz. There are four external 5dBi antennas, and the rates can exceed 1.166Gbps.

2. Protection

When setting up the network, the signal coverage and cost will depend on the device’s quantity, signal quality, and location. To cut costs and the number of devices, we should deploy each router in the most effective location. Remember that the floors, walls, and doors will affect how well the signal is transmitted. Additionally, you require fewer devices, and the more area the signals can cover.

See also  How To Debug A 6In4 Tunnel Interface In Cisco Router?

3. Safety

The device may be more easily assaulted by physical attacks, denial of service attacks, passive surveillance, etc., the more nodes you set up. Although some systems will update the security status automatically, it would be great if we could keep the network security on our own. Advanced security settings, like allowing MAC addresses, may not be possible on some wireless networks because they use app-assisted installation.

4. Difficulty of setup

The mesh network can be set up in a variety of ways. Some wireless mesh networks demand that you download a mobile app, while others might allow you to utilize the browser and access a particular page. You can decide which is easiest for you. The latter is what the V-SOL mesh WiFi system uses, and we will describe the procedure below.

How to Add a Mesh Network to an Existing Router?

Put your current router in bridge mode so you can install a mesh network if you must use it.

  1. Please verify that your mesh network can accommodate numerous nodes connected to a router. For instance, Google Mesh only permits one node to connect to a live router.
  2. Follow the configuration instructions and connect your “gateway” or “network” node to your router. You will be asked to enter “bridge mode” on your gateway. Any router features on the gateway are disabled in this mode.
  3. Bridge mode will be accessible through the “advanced networking” menu of your device’s app if you don’t see a configuration screen. For instance, it may be found in Google Home under Wi-Fi > Settings > Advanced Networking > Network Mode.
  4. Place your nodes as directed by the app’s configuration instructions.

How to Add a Mesh Network to an Existing Router?

You can disable the router built into your modem if you want to use the modem portion and use the mesh network in its place.

  1. Any Ethernet cables should be unplugged from your modem or router. It will lessen the load on the router and avoid signal hiccups.
  2. Enable “bridge mode” by accessing the administrative interface on your integrated modem/router. This is typically located under “Wireless Settings,” or in a related section; however, you may need to verify your device’s instructions.
  3. Note: You might need to get in touch with customer care to have them perform this remotely if you’re renting a device from your internet service provider.
  4. Reboot your router manually if it doesn’t do so automatically.
  5. Connect your mesh network device, then use the app’s configuration guides to set it up.
See also  How To Use Router To Monitor Which Websites Are Visited?

Why do we need mesh-router system?

Large homes with multiple floors and walls that impede wifi signals won’t be covered by many conventional routers. The simple remote management mesh routers provide through their mobile apps is also a significant bonus if you’re interested in smart-home capabilities.

On the other hand, mesh routers are unnecessary if you reside in a small house or apartment and only sometimes have wifi outages. A short-range extender or long-range router might suffice to fill in dead spots.

There are no dead spots or slow internet connections for you to contend with. It’s time to change to a new standard router with greater range capabilities, a mesh-router kit, or a range extender, depending on your needs and price range, if you’re sick of having to reset your router or adjust the antenna all the time. All can connect homes on various frequencies and are tuned to deal with obstacles in the home.

Consider your wifi requirements when choosing the finest wireless networking equipment for your home. There are several wireless networking solutions available that can help improve a home wifi signal.

Mesh Network FAQ

Can you use 2 routers on a mesh network?

You could increase the reach of your current network by using a second router. In order for your BluOS Players and other network devices to connect to whichever router has the stronger signal, it is also very easy to create just one network name between the two routers.

Can you mesh two different routers?

No we can’t. The second router can function as an access point. Use an Ethernet cable to connect any of the first router’s LAN ports to the second router’s WAN port. Access point mode or the DHCP server should be disabled on the second router.

Leave a Reply

Your email address will not be published.