How To Enable Upnp On Orbi Router?


As the technology world evolves, so does the way we connect to the Internet. And with that comes the need for better and easier ways to access our favorite online resources. One such resource is your Orbi router. If you’re unfamiliar with Orbi routers, they are a type of router that can be used to access devices in your home from anywhere in the world. And because they use NAT (Network Address Translation), they can also be used to enable UPnP on your router. UPnP is a protocol that allows devices on your network to share files and other resources. In this post, we will show you how to enable UPnP on your Orbi router so you can access all of your devices from anywhere in the world.

What is UPNP?

UPnP is a protocol that helps network devices communicate with each other over a network. This can be useful for devices like game consoles, streaming devices, and smart home gadgets. UPnP can also be used to manage media files on your router. By default, Orbi routers have support for UPnP enabled. However, you may need to enable UPnP on your router for certain features to work.

To enable UPnP on your Orbi router:

  1.  Open the Orbi app and click on the “Settings” button in the upper-left corner of the screen.
  2.  Under the “Network” section, click on the “UPnP Settings” button.
  3.  On the next screen, check the “Enable UPnP” box and then click on the “OK” button.
  4.  You will now need to enter your router’s IP address into the “Port Range” field in order for UPnP to work.
  5.  Click on the “Advanced Settings” button and then enter your router’s DNS servers in the “Upnp Servers” field.
  6.  If you want to use Orbi’s Media Server feature, you will need to set up port forwarding rules first.

How to Enable UPNP on Orbi Router?

UPnP is a networking protocol used to configure and manage network devices from a single interface. Orbi routers can be configured to enable UPnP for both wired and wireless networks.

To enable UPnP on your Orbi router:

  1. Open the Orbi app.
  2. Under Settings, select Network.
  3. Select UPNP under the Network heading.
  4. Under UPNP settings, scroll down and select Enable UPnP.
  5. Click Apply.
  6. In the UPNP port range field, type 10000-19999 (or any other unused port on your router).
  7. In the Default gateway field, type the IP address of your Orbi router (usually
  8. In the Optional DNS servers field, type the IP addresses of desired DNS servers for your network (usually, you have completed these steps, you will be able to use UPnP to manage devices connected to your Orbi router!

How to Disable UPNP on Orbi Router?

There are two ways to disable UPnP on your Orbi router. The first way is to go to the System Settings menu and uncheck the box next to UPnP. The second way is to go to the Networking section of your Orbi router and disable UPnP from there.


We all know that Orbi router is one of the best routers out there. It offers great performance, and its security features are top-notch. However, if you’re not familiar with how to enable UPnP on Orbi router, this guide will walk you through the process. By following these simple steps, you’ll be able to port random ports on your Orbi router for use by various devices in your home without having to worry about security issues.

Leave a Reply

Your email address will not be published. Required fields are marked *