How To Reset Netgear Router?


A lot of people are struggling to connect their devices to the internet. Whether it’s a laptop, phone, or streaming device – most people have trouble getting them connected. In this article, we’re going to show you how to reset your Netgear router.

What is a Netgear Router?

Netgear routers are a type of network router that allow users to connect to the Internet and share files, printers, and other resources in their home or office. Netgear routers are also known for their user-friendly interface and reliable performance.

How to Reset a Netgear Router?

If your router is password protected, you will need to reset it before proceeding. Resetting a router will clear all its configuration settings, returning it to its default state. To reset your Netgear router, follow these steps:

  1. From the front of your router, locate and press the WAN/LAN button.
  2. While holding down the WAN/LAN button, press and hold the RESET button for about six seconds.
  3. Release both buttons when the LED on the router turns green.
  4. Your router is now reset and ready to use.

What if the Router is Offline?

Netgear routers are known for their long battery life, but what if your router is stuck offline? You can reset your Netgear router to clear any cache and reload the firmware. This will help your router get online and start functioning again.

There are a few things you need before you start: an Ethernet cable, a computer with a web browser, and your Netgear router’s user manual. The first thing you’ll need to do is connect your router to your computer using an Ethernet cable. Make sure your computer is on the same network as your router. Next, open up a web browser on your computer and type in the IP address of your router. You’ll see a page that looks like this:

Click on the “Linksys” tab, and then click on “Reset Your Router.” You’ll be asked to enter your password. If you’ve forgotten your password, click on the link that says “Forgot Your Password?” On the next page, you’ll be asked to choose which type of reset you want to perform: factory default or administrator reset. Factory default is the easiest option

How to Reset a Netgear Router using WPS?

Netgear routers offer a reset button for when you need to get back to factory settings. Resetting your router ensures that all of your settings are back to their defaults, including the network settings, passwords, and so on.

To reset your Netgear router using WPS, first turn off your router by pressing the power button for 10 seconds. Once you’ve turned off your router, press and hold the WPS button on your home network adapter for 5 seconds.

The WPS light will start blinking and will stay lit until you release the WPS button. Then, connect your computer to the router with an Ethernet cable. Enter the default router username and password, and click OK.

Once you’ve logged in, select Settings from the main menu. Under System Configuration, click Firmware Upgrade from the left column. Click Browse Files and locate the latest firmware file for your router. Click Upload File to upload the file to your router.

After uploading the firmware file is complete, click OK to proceed to the next step. Select Reboot Router from the Firmware Upgrade menu and wait for your router to reboot. You’re now ready to reconfigure your network settings!


Unfortunately, there are times when we encounter problems with our Netgear routers. Whether it’s a lost connection or an inability to access some of the features of our routers, sometimes it can be difficult to get them working properly again. In this article, we will show you how to reset your Netgear router so that you can start afresh and troubleshoot any issues that might be causing problems. We hope that this guide will help you get your Netgear router back up and running as smoothly as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *